Why does my GE dehumidifier not work?
If your dehumidifier is not collecting water, the unit is not operating properly: Try resetting the dehumidifier by disconnecting power to the unit for 30 seconds and re-connecting the power. Then, set the control settings and see if the unit operates properly.
Why is my dehumidifier not starting?
Confirm that the circuit breaker and/or fuse that serves the dehumidifier is not tripped or a fuse is not blown. Confirm that the controls are on the ON position. Verify that the humidistat is set between 50 and 60 percent relative humidity. If the dehumidifier still does not operate call a competent HVAC servicer.
Why is my dehumidifier running but not collecting water?
If your dehumidifier is not collecting water even though the room temperature is over 65 degrees Fahrenheit, it likely means that the dehumidifier compressor is not working. This part can fail for a number of reasons, one of which is that the overload device has failed.
How do I fix my dehumidifier not working?
- 1 Check the power. …
- 2 Unplug the dehumidifier unit and check the power cord. …
- 3 Remove the cover panel and look for ice. …
- 4 Remove and test the overflow cutoff switch. …
- 5 Remove the humidistat and check it.
Why does my GE dehumidifier keep stopping?
If your dehumidifier keeps shutting off, the sensor may not be reading the humidity level correctly, resulting in the unit shutting off before reaching the desired level. Some dehumidifiers also have a thermistor that works with the sensor which can also be faulty.
How long should a dehumidifier last?
Maintain Your Appliance The lifetime of dehumidifiers usually ranges from five to 10 years. To maximize the lifetime, it’s important to care for your dehumidifier. Be sure to regularly change the air filters, clean the condensing coils and exhaust grilles, and empty and clean the water bucket.
Does a GE dehumidifier have a reset button?
Broadly speaking, dehumidifiers from major manufacturers do not have reset buttons, though your particular brand may have one. A lack of a designated “reset” button does not mean the appliance cannot be rebooted; the procedure often involves simply disconnecting the power.
Why do dehumidifiers fail so quickly?
A common cause for the overload to fail is from operating the dehumidifier on long or undersized extension cords.
How long does it take a dehumidifier to start collecting water?
On average, a dehumidifier begins to collect water as soon as it is switched on. The time taken for a dehumidifier to fill the collection tank can be anywhere between 6-8 hours for a 2-liter tank.
How do I clean the coils on my GE dehumidifier?
Use a soft-bristled brush or cloth to clean the coils with a spray detergent or mixture of vinegar and water. Rinse off any residue. Make sure you let the coils completely dry before using your dehumidifier again. You may want to use a flashlight to have a good look inside your dehumidifier.
Is it worth fixing a dehumidifier?
At times, it may be worth repairing a dehumidifier for relatively cheap or as a DIY project. However, the average repair cost for a dehumidifier is $50 to $200. The more complicated the issue, the more expensive it will be. In this case, it may be worth investing in another instead of repairs.
Does a dehumidifier always collect water?
All portable dehumidifiers have a water collection container, often called a tank or a bucket, to collect the water extracted from the air. These buckets are quite small, to keep the overall size of the dehumidifier down, and need to be emptied at least once a day.
How do I know if my dehumidifier compressor is working?
If your dehumidifier is no longer pulling water from the air and you have verified that the ambient room temperature is above 65 degrees Fahrenheit, then the unit’s compressor may not be running. The compressor is the pump that circulates the refrigerant through the evaporator to extract moisture from the air.
How do I test my dehumidifier?
- Check your water levels.
- Feel for air flow.
- Look at the lights.
- Listen carefully.
- Place a humidity gauge in the room.
Where is the float switch on a dehumidifier?
Float Switch The switch can be found near the bucket, and is activated by the float mechanism when the bucket is full of water. This dehumidifier part is important because it also functions as a safety mechanism, to keep the appliance from overflowing with water.
Why does my humidifier keep stopping?
If your humidifier has reached the designated humidity level, it will turn off. It’s like a thermostat but measuring your local humidity instead of temperature. To turn your humidifier back on, simply raise the humidity level higher.
How do you reset the filter on a GE dehumidifier?
- Remove the bucket.
- Remove the filter according to the instructions in the Owner’s Manual.
- Clean the filter with warm, soapy water. …
- Rinse well and allow it to dry completely before replacing.
- Reset the filter reminder timer by pressing the Filter pad or button for 3 seconds.
Will a dehumidifier turn off when full of water?
Yes, most dehumidifiers have an auto-turn-off switch that will turn the unit off either when the collection tank is full or when your space reaches the set humidity level. If your dehumidifier is overflowing, it’s likely an issue with your humidity settings or auto-shut-off function.
Why is my GE dehumidifier not draining through hose?
If water is not draining through the hose, please check the following: Make sure you have a good connection where the garden hose attaches and that there is a rubber washer properly installed in the end of the garden hose. If the connection is loose, gently tighten the connection with pliers.