why won’t my roomba charge anymore

What do you do if your Roomba won’t charge?

If your Roomba is not charging, clean the charging ports with a soft cloth and some rubbing alcohol to remove dust, hair, or gunk accumulation. You may also have to reinstall or replace your battery or charging dock or even reset the Roomba to factory settings.

How do I know if my Roomba battery needs replacing?

1. A battery icon will be displayed in the top-right corner, indicating the current status of the battery.
2. The CLEAN screen will display “Ready to clean. …
3. The CLEAN screen will display “Ready to clean.

How many years does Roomba battery last?

Usually, the Roomba battery usually needs to be replaced every 1 to 2 years. If you have not, then we strongly suggest you to replace the battery and the cleaning time should improve greatly. I bought Roomba 565 last August and use it at least 1-2 times daily.

How do you revive a dead Roomba battery?

1. Step 1: Allow Time for Automatic Reconditioning. Allow the Roomba to return to its charger after every use, except when manually reconditioning the battery. …
2. Step 2: Perform Manual Reconditioning. …
3. Step 3: Reinstall the Battery and Charge. …
4. Step 4: Recharge the Battery.

Does Roomba base light stay on when charging?

When the Roomba is properly charging, you won’t see any lights on the device itself. These are purposely shut off to conserve energy. However, if a problem occurs, the device will say “uh-oh,” and a troubleshooting light will blink. The number of times it blinks consecutively alerts you to the problem.

Should green light be on when Roomba is charging?

You can tell if a Roomba is charging through its light indicators. Green light means charging, but the power light only turns on for a minute for Roomba 700, 800, and 900 series. Indicator lights of newer models like the i7 and i7+ stay on when plugged into the power cord.

How do I know if Roomba battery is bad?

1. The battery doesn’t hold its charge. …
2. The Roomba is too old. …
3. The unit performs poorly even after the reset. …
4. The power light doesn’t display. …
5. The running time & performance reduces.

Should Roomba be plugged in all the time?

To extend Roomba’s battery life and keep Roomba cleaning at peak performance: Always keep Roomba plugged in when not in use. Recharge Roomba as soon as possible. Waiting several days to recharge Roomba can damage the battery.

How do I check my Roomba battery?

Charge Roomba using the Home Base. Indicator lights will turn off after 60 seconds to conserve energy while Roomba is charging. Check status of the battery by pressing the CLEAN button to illuminate the Battery Indicator. Indicator will appear amber while the battery is charging and solid green when fully charged.

Does Roomba have a lifetime warranty?

The RobotShop Limited Lifetime Warranty is applicable on certain selected items only such as the iRobot Roomba for a normal, non-commercial use.

How do you restart a dead Roomba?

For all robots with the Dock and Spot buttons and no green dot: Press and hold HOME and SPOT Clean buttons on your robot for 10 seconds. When the button is released, Roomba will play the reboot tone. Wi-Fi connected Roomba 800 series.

Is there a reset button on a Roomba?

Press and hold the Home, Spot Clean, and Clean buttons simultaneously. Then, wait for the light ring around the Clean button to begin swirling. Once there’s a light ring, let go of the three buttons. Now, the Roomba will restart, signaling the end of the factory reset process.

How can I tell if my Roomba is charging?

Charge Roomba using the Home Base. Indicator lights will turn off after 60 seconds to conserve energy while Roomba is charging. Check status of the battery by pressing the CLEAN button to illuminate the Battery Indicator. Indicator will appear amber while the battery is charging and solid green when fully charged.

How do I reset my Roomba 980 battery?

1. Press the CLEAN button to turn on the Roomba.
2. Hit the SPOT and DOCK buttons simultaneously for 10 seconds.
3. Release both buttons at the same time as soon as you hear the typical beep sound.
4. Stop loading the robot for at least 12 hours and then try it.