why doesn’t my samsung watch won’t turn on

ByMaksim L.

Oct 4, 2022

Why is my Galaxy Watch screen black?

If the battery percentage is greater than 20 – 25% and your watch shows a black screen or is not responsive to the touch, a soft reset helps fix this issue. Once the watch is powered off, press and hold the Power button until the Samsung Galaxy logo appears, then release the button.

Why is my smartwatch screen not working?

Check that the screen is clean and free of dust. Consider the temperature where you are trying to use the watch. Sometimes if the device gets too cold or too hot, the touchscreen can be glitchy. Cold fingers often don’t work well on touch screens, so warm up and then try again.

Why is my Galaxy Watch 4 not working?

Often, you can rectify a Samsung Galaxy Watch 4 problem simply by restarting the device. The same is true for any device. Make sure your Galaxy Watch 4 and smartphone have enough charge. They don’t have to be full, but we recommend at least 80% battery life to rule out power issues.

How do you reboot a Samsung watch?

  1. Open the Galaxy Wearable app on your connected phone.
  2. Next, tap Watch settings. Note: You can skip this step on some watch models.
  3. Tap General, tap Reset, and then tap Reset again to confirm.

How do I force restart my Samsung Watch 4?

Step 1 Force restart your Galaxy Watch4 Push and hold the home and back buttons together for at least 8 seconds. After three seconds the display will show a “Power off” symbol on the screen. Keep pressing the buttons. Let go of the buttons when you see the watch restart.

How do I turn on my Samsung Galaxy 4 watch?

How to turn on the Galaxy Watch 4. To turn on your Galaxy Watch 4, locate the home button, (the top button with a red lining). Press and hold the home button until you see the Samsung startup screen.

How do I get my Samsung watch out of reboot loop?

Press and hold just the Power/Home button for around 10 seconds until you see that “Rebooting…” message on the watch’s screen. As soon as you see that message, release the button. Wait and see if your watch boots up normally and shows your watch face.

How do I fix my Samsung watch unresponsive touch screen?

Force Restart Watch The first thing that you must do when your Samsung Galaxy smartwatch touch screen doesn’t work is to restart the watch. For that, press and hold the two buttons on the side of your watch simultaneously for at least 30 seconds or until your see the Samsung logo.

Leave a Reply

Your email address will not be published.