why my bell remote is not working

ByMaksim L.

Sep 26, 2022

Why is my Bell TV remote not working?

Before you begin troubleshooting, make sure that the batteries haven’t run out and that there are no obstructions between your remote and the TV. Make sure that the LED lights turn on when you press the buttons on the remote. Clear the remote programming commands and then reprogram the remote to work with the TV.

How do you reset a bell remote?

Press and hold the OPTIONS button for 3 seconds until the green TV light blinks twice. Enter the 0000 using your remote’s number buttons. You must enter the code within 10 seconds. The remote is set back to factory settings.

How do I get my bell remote to work?

  1. Turn on your TV and your Fibe TV receiver.
  2. Press and hold the options button for three seconds, until the green light blinks twice.
  3. Enter the 4-digit code for your TV’s brand (or code 0001 to search all brands). …
  4. Press and hold the power button until your TV turns off. …
  5. Let go of the power button and press select.

Why is my remote suddenly not working?

Make sure none of the remote buttons are jammed or stuck. The remote control battery terminals may be dirty. Remove the batteries and clean the remote control terminals with a small solution of alcohol, using a cotton bud or soft cloth, then place the batteries back into the remote control.

Does Bell replace remotes?

All Bell remotes come with a 1-year warranty. If your defective remote is still under warranty, please contact us by chat or phone. If the warranty has expired, you will need to purchase a replacement. If you received a replacement remote control, you do not have to return your old one.

Why is my MTS remote not working?

Try pressing the STB or MTS button on the top left hand side of your Bell MTS remote control to make sure it is in the right mode. Test or replace the batteries in your remote control. Clear any obstructions blocking the line of sight between your remote control and the Bell MTS Set Top Box.

Why is there a red light on my Bell remote?

If the fibe LED light flashes red three times, the batteries need to be replaced.

How do I reset my Bell 6131 remote?

On your Satellite TV remote, press MENU. Scroll to and select System Setup. Scroll to and select Factory Defaults. Read the warning and select Yes.

How do I reset my Bell 6400 remote?

  1. If you can’t see any picture on your TV, reset your receiver by pressing and holding the POWER button for 5 seconds. …
  2. On your Satellite TV remote, press MENU.
  3. Scroll to and select System Setup.
  4. Scroll to and select Factory Defaults.
  5. Read the warning and select Yes.

Why will my remote not change channels?

Check the batteries in your remote control. If you do not see at least 1 button lighting up on the remote upon pressing the button, then the batteries may be depleted. Change the batteries in your remote control and retest. Power down your set-top box using the “CBL” button on the remote and then power it back up.

Is there an input button on Bell remote?

You may also be able to do this from your Bell universal remote if it has been programmed to operate your TV. Press the input button repeatedly, or use the arrow buttons, to cycle through the input options until the one you identified in step 1 is selected.

How do I connect my bell 4K remote to my TV?

Bluetooth® Slim Press any button while pointing the remote towards the 4K Whole Home PVR (the Bluetooth light on your receiver should start blinking blue). Wait 30 seconds for your remote to be paired. The Bluetooth light on your receiver will turn solid blue to indicate your remote is paired.

How do I program my Bell MTS remote?

  1. Press and hold SETUP until the mode key blinks twice.
  2. Press the mode key (TV, DVD or AUX) for the device you wish to set up. The mode key will stay lit.
  3. Press and hold the OK key.
  4. Release the OK key when your device turns off.

Why can’t I change channels on my Bell remote?

Check that the batteries in the remote are correctly inserted, or replace them. Your remote batteries may be weak and need replacing if you have to press the POWER button more than once to turn your Bell Satellite TV receiver on or off, or if you have to move closer to the receiver for the remote to work.

How can I control my Bell TV without a remote?

Touch the TV button to play the content on your TV. From the guide, you can also select a channel logo to tune your TV directly to that channel. Touch Remote to display the remote control screen. Note: The remote screen will only appear when your smartphone or tablet is connected to your Bell Wi-Fi network.

Leave a Reply

Your email address will not be published.