why do my galaxy buds live keep disconnecting

ByMaksim L.

Sep 20, 2022

Why won’t my Galaxy earbuds stay connected?

If your phone cannot connect to your Galaxy Bud series earbuds (like the Galaxy Buds2 Pro) or Gear IconX earbuds, getting them to connect again will only take a couple of steps. Performing a restart on the earbuds, resetting the Bluetooth connection, or updating the Galaxy Wearable app will normally fix the issue.

How do I fix my Samsung buds connection?

  1. Check for interference. …
  2. Turn Bluetooth on and off (restart). …
  3. Restart your device. …
  4. Unpair the Galaxy Buds 2 and delete the Bluetooth profile on your connected device. …
  5. Try connecting the Galaxy Buds 2 to another device. …
  6. Charge the Galaxy Buds 2. …
  7. Soft reset your Galaxy Buds 2.

Why do my Galaxy buds keep glitching?

Make sure your earbuds and phone or tablet have the latest software version installed. If an issue occurs when using a certain app, such as Spotify, make sure the app is also up to date. If you’re using your earbuds with a computer, TV, or watch, make sure to check for software updates on those devices as well.

How do I reset my Samsung Bud live?

First, navigate to and open the Galaxy Wearable app on your Galaxy phone. For the Galaxy Buds+, Galaxy Buds Live, and Galaxy Buds Pro, tap General. Tap Reset, and then tap Reset to confirm.

How far can Galaxy Buds be away from phone?

A: I’ve left my phone in my car while at the gas station and went inside to pay for the gas, and I was still able to talk on the phone so I would say at least, 20-50ft range. A: I have personally charged the Buds with my laptop with no issues.

How do I manually reset my Samsung buds?

  1. For the Galaxy Buds, you can reset them by using the Galaxy Wearable app. You will just need to open the app and tap General. Tap Reset and then tap Reset to confirm.
  2. You can also perform a hard reset using the sensors located on the Galaxy Buds, tap, and hold them for 10 seconds.

Why does my Bluetooth earbud keep disconnecting?

There may be too many apps running in the background of the device the Bluetooth is attempting to pair with. Certain applications cause interference with the connection, and some devices are limited in the number of applications that can run concurrently. If in doubt, check with the headset manufacturer.

How do I clear cache on Samsung Bluetooth?

  1. To do this, open Settings, and then swipe to and tap Apps.
  2. Tap the Sort icon (the down arrow with three vertical bars), then tap Show system apps.
  3. Tap OK and all the system apps will appear in the list.
  4. Tap Bluetooth, tap Storage, and then tap Clear data. Tap OK to confirm.

Can Galaxy Buds be repaired?

Arrange for a service visit at home, schedule a walk-in appointment or mail your device in for a repair.

How do you clean dirty earbuds?

Clean the Earbud Tips Mix a solution of one part dishwashing liquid and five parts lukewarm water in a small bowl. Add the tips and allow them to soak for at least 30 minutes. After soaking, use a cotton swab dipped in the soap mixture to give them a better cleaning.

Why is my right earbud not working?

If a single earbud only cuts out occasionally, try twisting and taping the cord until sound comes through it again. If twisting the cord doesn’t work, you may need to open the earbud and solder the connection if you’re able to. In some cases, you may need to buy new earbuds.

Why are my Galaxy Buds clicking?

The crackling can also be caused by simply standing too far from the device you connected your headphones with wireless Galaxy Buds: Move closer to this unit. In fact, the connection Bluetooth allows you to walk away from your device up to 10 meters.

Can you use Galaxy Buds without the app?

No worries, you can use your Samsung earbuds just like other Bluetooth headphones. You may need your device’s manual handy. Place your earbuds in the charging case, and then close the lid. Wait 5-6 seconds, and then open the case.

How do I connect to Galaxy Buds live?

All you have to do to pair the earbuds is enable Bluetooth on your Android smartphone, and open the charging case. A pop-up card will appear and read, “My Galaxy Buds Live” at the top. Once you tap “Connect,” a connection will then establish between your smartphone and the Samsung Galaxy Buds Live.

How do I force Galaxy Buds to pairing mode?

Place your earbuds in the charging case, and then close the lid. Wait 5-6 seconds, and then open the case. The earbuds will automatically enter Bluetooth pairing mode. If they are already paired to another device, insert them into your ears and hold both touchpads for a few seconds until they enter pairing mode.

Why wont both of my Galaxy Buds connect?

Shut down the smart device, and leave it off for at least 30 seconds, then power it back on. Then, try pairing the buds to your device again by navigating to Settings > Connections > Bluetooth. Re-pair the Galaxy Buds to your smartphone and check to see if both buds work.

Why are my earbuds not connecting?

If your Bluetooth devices won’t connect, it’s likely because the devices are out of range, or aren’t in pairing mode. If you’re having persistent Bluetooth connection problems, try resetting your devices, or having your phone or tablet “forget” the connection.

Why is one side of my Galaxy Buds disconnected?

Check the earbuds’ battery status. If they have a low battery, the buds may disconnect from the phone. In this case, you will need to charge the earbuds. You can check the battery level in the Galaxy Wearable app. Alternatively, you can insert the earbuds in the case to check the battery life.

Leave a Reply

Your email address will not be published.