why is my hp officejet 4630 not printing

ByMaksim L.

Sep 19, 2022

How do I reset my HP OfficeJet 4630 printer?

  1. Disconnect the power cable from the printer while the printer is still ON.
  2. Disconnect any other cables if connected the printer.
  3. Press and hold the printer’s power button for 15 seconds.
  4. The printer should be directly connected to the wall outlet and not to a surge protector.

Why is my printer suddenly not printing?

My printer won’t print Make sure there is paper in the tray(s), check the ink or toner cartridges aren’t empty, the USB cable is plugged in or the printer is connected to Wi-Fi. And if it is a network or wireless printer, try using a USB cable instead.

How do I clean the printheads on my HP OfficeJet 4630?

On the printer control panel, press the Down Arrow to select Tools, and then press OK. Press the Down Arrow to select Clean Printhead, and then press OK. The printer cleans the printhead, and then prints a printhead test page.

What do I do if my HP printer is not printing?

Make sure the correct ink or toner cartridges are installed and the printer has sufficient ink or toner for your print job. Make sure no error messages or blinking lights display on the printer control panel. Resolve any errors before you use the printer. Restart the printer to clear any error states.

Why is my HP Officejet 4635 not printing?

Restart the PC again. Then download the latest full feature driver from https://hp.care/2pU8Rah and install it on the computer after selecting the correct operating system. Connect the printer to your computer only when the setup prompts for the printer. This should fix the issue.

Where is the reset button on HP ink cartridges?

Just above the circuit board on most printer cartridges, you’ll find a small button. You’ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).

Why is my printer not printing even though it’s connected?

Do a hard reset on your printer. To do this you just need to turn off your printer, unplug for a few minutes and then plug the printer again. If that still doesn’t work, try turning the printer and your computer off, and then start it back up again. Try uninstalling and then reinstalling your printer driver.

What do I do when my printer is printing blank pages?

  1. Print a Test Page. …
  2. Restart Your Printer and PC. …
  3. Fix Ink/Toner Cartridge Issues. …
  4. Unclog the Print Head. …
  5. Align the Printer Cartridges. …
  6. Run the Printer Troubleshooter. …
  7. Update Printer Drivers. …
  8. Print Directly to the Printer.

How do I reset my HP printer?

With your printer on, press and hold the Wi-Fi button and the cancel button simultaneously. This will put your HP printer into setup mode. Download the HP Smart app onto your Android device or iPhone to complete the password change procedure. Within the HP Smart app, choose “Printer Setup. ”

How can you tell if a printhead is clogged?

If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it’s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it’s time to remove the excess ink.

Why is my printer not printing when the ink is full?

There are a few things that could be the cause of this problem, including: – Empty ink or toner cartridges that need replacing. – Ink or toner cartridges that have become dislodged from their proper place. – The wrong paper size loaded in the input tray.

Why won’t my HP printer print after I changed the ink?

Perform a head cleaning on the printer, if available. Try resetting the ink cartridge counter. Consult your printer’s documentation to get instructions for your specific model or check the manufacturer’s website for help. Verify no software errors are occurring and try printing a test page.

How do I get my HP printer to print?

  1. Select the file you want to print and open the file so it appears on your computer screen.
  2. Press the Ctrl and P buttons on your keyboard at the same time.
  3. Once the printing pop-up menu appears on your computer screen, select the printer you intend to send the job to.
  4. If needed, modify your print settings.

How do I reset my HP Officejet 4632 printer?

1) Press the Wireless button to access the Wireless Status menu. 2) Press the button next to Settings to access the Wireless Settings menu. 3) Select Restore Defaults. 4) Confirm the selection to restore defaults.

When did Officejet 4630 come out?

Product Dimensions 17.56 x 13.07 x 7.44 inches
Best Sellers Rank #141,307 in Office Products (See Top 100 in Office Products) #6,175 in Inkjet Computer Printer Ink
Is Discontinued By Manufacturer No
Date First Available April 24, 2014
Manufacturer Hewlett Packard

How do I reset my printer to factory settings?

  1. Touch or swipe down the tab at the top of the screen to open the dashboard on the printer control panel.
  2. Select “Setup” and then select “Printer Maintenance”
  3. Select “Restore” and then select “Restore Factory Defaults”
  4. A message appears stating that the factory defaults will be restored.

Is there a reset button for a HP Officejet 4632?

1) Press the Wireless button to access the Wireless Status menu. 2) Press the button next to Settings to access the Wireless Settings menu. 3) Select Restore Defaults. 4) Confirm the selection to restore defaults.

How do I reset my HP printer without the screen?

  1. Press the Cancel button to ready the printer.
  2. Press and hold the Wireless button and Cancel button at the same time until the Power button flashes. …
  3. Wait 60 seconds until the Wireless light blinks blue.

How do I clear the error code on my HP printer?

  1. With the printer turned on, disconnect the power cord from the printer.
  2. Unplug the power cord from the power source.
  3. Wait 60 seconds.
  4. Reconnect the power cord to a wall outlet and to the printer. note: HP recommends plugging the printer directly into a wall outlet.

Leave a Reply

Your email address will not be published.