What is the correct tension on a chainsaw?
A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can’t pull the drive links out of the bar nose.
Why do Loggers Run chainsaw bars upside down?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
What causes a chainsaw to bind?
Binding (or pinching) occurs when the material you’re cutting clamps down and stalls the cutting chain inside of the kerf (or cut). Binding can lead to kickback, pushback and pull-in.
How many times can you sharpen a chainsaw chain?
A chainsaw chain can be sharpened up to 10 times, sometimes more, before the entire chain needs replacing. It’s mostly dependent on two things; the amount of wear your chain incurs and the amount of metal removed every time you sharpen.
When should you throw away a chainsaw chain?
Chainsaw feels unbalanced, cuts unevenly, or rattles when in use. In short, if you have attempted to balance your cutting teeth, are certain of your depth gauge, and the tension is properly adjusted, but the saw still doesn’t cut correctly- then you need to replace the chain.
Can you over tighten a chainsaw chain?
There is a tension screw located near the base of the bar on the chainsaw. To tighten the chain, turn it clockwise, and to loosen turn it counterclockwise. Don’t over-tighten the chain as this could cause it to break.
Why does my chainsaw smoke when cutting?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
Why does the chain slip on my chainsaw?
As you use your saw, it is naturally going to heat up and get larger. Therefore, a chainsaw chain can start off tight and then loosen up. If you store your chainsaw chain in a cool environment and then use it, you may find that your chain needs to be tightened after running it for a while.
How do you straighten a bent chainsaw bar?
- Lift the blade guard into the up position.
- Remove the bolts or screws that hold the chainsaw’s bar in place.
- Slip the chain blade off the bar.
- Remove the bar and examine the bend.
- Place the bar inside a vise. …
- Use pliers to pry the bar back into position.
- Remove the bar from the vise.
How many times can you sharpen chainsaw chain?
A chainsaw chain can be sharpened up to 10 times, sometimes more, before the entire chain needs replacing. It’s mostly dependent on two things; the amount of wear your chain incurs and the amount of metal removed every time you sharpen.