why would my epson printer print blank pages

ByMaksim L.

Sep 5, 2022

Why is my Epson printing blank?

If blank pages print unexpectedly, try these solutions: Make sure you selected the correct paper size settings in your printing program and printer software. If a blank page exists in a document you are printing and you want to skip printing it, select the Skip Blank Page setting in your printer software.

Why is my printer printing blank pages when the ink is full?

There are numerous possible causes for a printer that’s randomly producing blanks. The most common ones are empty ink cartridges, improper cartridge installation, and congested nozzles. Driver and software issues can sometimes cause this problem as well.

Why is my Epson printer not printing when the ink is full?

Why is my Epson printer not printing when the ink is full? It is possible that the cartridge is old and the printer won’t recognize it. Also, printheads clog because nozzles get blocked by either air or ink. You can de-clog them using a pin or window cleaner.

How do I fix my printer that prints blank pages?

  1. Print a Test Page. …
  2. Restart Your Printer and PC. …
  3. Fix Ink/Toner Cartridge Issues. …
  4. Unclog the Print Head. …
  5. Align the Printer Cartridges. …
  6. Run the Printer Troubleshooter. …
  7. Update Printer Drivers. …
  8. Print Directly to the Printer.

Where is the reset button on an Epson printer?

To Factory Reset an Epson printer: Turn off the printer. Press and hold the reset button on the back of the printer (normally located to the right of the ethernet port).

How do I unclog my Epson printer head?

Simply remove the cartridges and spray some Windex in the offending holes where the ink flows into the printhead itself. You can leave this for several hours or even overnight untill all dried ink inside the printhead is dissolved.

How can you tell if a printhead is clogged?

If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it’s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it’s time to remove the excess ink.

How do you unclog a print nozzle?

If they’re on the cartridge, and the cartridge is mostly empty, you can just replace it. The new nozzles will obviously be unclogged. Seriously clogged nozzles can be cleared with some isopropyl alcohol and another run through the clean cycle.

Why is my Epson printer not printing after changing cartridges?

Verify the ink cartridge(s) is inserted properly. Some cartridges snap in place, and if they are not inserted fully, the printer won’t print anything. If a lever is moved from its original position to allow for installation of ink cartridges, ensure it is returned to its original position.

How do I reset my Epson printer after refilling?

Press the left or right arrow button to select Maintenance > Reset Ink Level. Press the start button, the OK button twice, and then the start button again. Press the right or left arrow button to highlight the ink tank you refilled and press the OK button to select it. Repeat for each ink tank color you refilled.

How do I reset my Epson printer without the Resetter?

  1. STEP 3: Once turned off, wait for five (5) seconds.
  2. STEP 4: Press and hold the pink button. …
  3. STEP 5: Press the pink button for about 10 seconds. …
  4. STEP 1: Press the power button (this will turn off your printer)
  5. STEP 2: Wait for 10 seconds.

Why is my Epson wireless printer not printing?

If you cannot print over a network, try these solutions: Make sure that your product is turned on. Make sure you install your product’s network software as described in your product documentation. Print a network status sheet and verify that the network settings are correct.

How do I fix an Epson printer printing blank pages in Windows 10 or Mac?

  1. Open the menu and select System Preferences.
  2. Select Print & Scan, Print & Fax, or Printers & Scanners, select your product, and then select Options & Supplies.
  3. Select Driver or Options. You see this screen:
  4. Set Skip Blank Page to On.
  5. Click OK.

Leave a Reply

Your email address will not be published.