How do I resync my SkyBell?
If your SkyBell device is already in Sync Mode (LED blinking red / green), tap the Continue button at the bottom of the screen. If not, press & hold the SkyBell device’s button (for approximately 15 seconds) until the LED blinks green rapidly, then release the button.
How do I stop my SkyBell from blinking?
You can perform a Soft Reset in the following way: Press and hold the SkyBell button for about 45 seconds. The LED will flash Green rapidly, then flash alternating Red/Green, then flash Blue rapidly.
What does it mean when a SkyBell blinks red?
Red (rapid flash) The SkyBell is not receiving sufficient power. This indication is typically of a failing transformer.
Why is my SkyBell not connecting to Wi-Fi?
If you are having syncing problems, it could be due to your router. Here are common router issues: 2.4 ghz Band SkyBell is only compatible with the 2.4ghz band. If you have a dual-band router, you may need to segregate the 2.4ghz band and create its own SSID in addition to having the 5ghz band.
How do I reset my SkyBell video doorbell?
Hard Reset – Hold the SkyBell LED (main button) down for approximately one (1) minute. The SkyBell will rapidly blink green and then blink Red/Green. Have the customer continue holding the button until the LED goes from rapidly blinking blue to rapidly blinking yellow. Now the customer can release the button.
Does SkyBell doorbell have a battery?
There is an internal battery that serves to regulate power and provide consistent power for SkyBell’s advanced features. SkyBell HD has a built in battery used for power regulation.
What color should my SkyBell be?
|Green Solid||Ready and working normally|
|White Solid||In Call mode|
|Blue Solid||Starting up|
|Blue Pulsing||Battery is charging|
|Blue | Green Alternating Flash||Connected to Wi-Fi, waiting for server connection|
What do I do if my SkyBell is blinking orange?
– If anything about your Wi-Fi network has changed, including the network name or password, this will throw the SkyBell HD offline. – If you see this Orange/Red blinking after a failed sync attempt, this means that the Wi-Fi may be too far away or not fast enough to connect to the SkyBell.
How do I reset my doorbell camera?
Hold down two buttons on your doorbell for about 10 seconds: Hold down the reset pin on the back (insert the release tool or paperclip into the hole near the top). At the same time, hold down the big doorbell button on the front.